the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

my first and second projects


Post ReplyPost New Topic
< Prev Topic Next Topic >
slayer1011 
Member - Posts: 5
Member spacespace
Joined: September 04, 2005
Location: Canada
Posted: September 26, 2006 at 9:15 PM / IP Logged  

ok, so maybe ive done other projects, but these are the only ones i have pictures of.. i started out by trying to add some vinyl to my GF's door inserts. that failed miserably ( too many compound curves for a beginner), so i decided to Fiberglass them smooth .. personally i dont like it this way cause its uncomfortable, but she likes it, and its her car, thats what matters right ;)

here are some pics of that.. (p.s.) this was my first project, and could have had some things done differently i know..

Note: the panels used to be ALL tan, so i bascially made the entire interior black and red for her... seats and carpet is next..

https://idolcreations.com/messageboard/garage/upload/garage_gallery-4-1130716831.jpg

second projects.. i took this on with a friend, i cannot take all responsability for this.. i will post progress pics, cause well who doesnt like to see the progression from start to finish?

Before:

http://www.idolcreations.com/messageboard/garage/upload/garage_gallery-4-1125359212.jpg
During:
https://idolcreations.com/gallery/albums/misc/na025.jpg
https://idolcreations.com/gallery/albums/misc/na027.jpg
https://idolcreations.com/gallery/albums/misc/na030.jpg
https://idolcreations.com/gallery/albums/misc/na022.jpg
https://idolcreations.com/gallery/albums/misc/na023.jpg
https://idolcreations.com/gallery/albums/misc/na039.jpg
After:
https://idolcreations.com/messageboard/garage/upload/garage_gallery-4-1158016434.jpg

the sides and rear were wingswest, so i didnt bother posting too many photos on that, the major work was creating the front lip, it was taken from an integra type R , 5-6 incles were taken out of the middle front and about 5 inches on each side were added to the sides so it would reach to the wheel well...

i think it flows nicely with the car, and moulded really nice...

Comments and suggestions for next time more than welcome (positive or negative)

Next: Custom trunk enclosure :D i really wanna try this out.. i have ideas in my head, just gotta put them to paper, then to practical

memphis9 
Copper - Posts: 53
Copper spacespace
Joined: November 12, 2005
Location: United States
Posted: September 26, 2006 at 9:28 PM / IP Logged  
nice, very well done with the front lip.
G-Boys Customz
Northville, MI
jlord16 
Silver - Posts: 322
Silver spacespace
Joined: September 08, 2005
Location: Australia
Posted: September 26, 2006 at 11:49 PM / IP Logged  

good work on the intregra's kit, make sure u post pics of the boot install

Clarion DB36MP
Infinity Kappa Perfect 10"
Respone 800w Mono
ALPINE MRP-F250
*Custom fabrications*
Aruman 
Silver - Posts: 363
Silver spacespace
Joined: July 27, 2005
Location: Aruba
Posted: September 27, 2006 at 6:23 AM / IP Logged  
very nice, and those are stock wheels?
Shaking The Neighborhood
realitycheck 
Silver - Posts: 751
Silver spacespace
Joined: September 09, 2004
Posted: September 27, 2006 at 8:56 AM / IP Logged  
What did you add to the sides of the lip?
Learning the trade one fiberglass creation at a time!
slayer1011 
Member - Posts: 5
Member spacespace
Joined: September 04, 2005
Location: Canada
Posted: September 30, 2006 at 8:10 PM / IP Logged  

the sides were just extended with more FG so they would reach teh wheel well, they were coming up short.

the wheels are not stock, just some 15's shes running for now... she plans on getting 17";s in the spring

Aruman 
Silver - Posts: 363
Silver spacespace
Joined: July 27, 2005
Location: Aruba
Posted: October 02, 2006 at 7:03 AM / IP Logged  
slayer1011 wrote:

the wheels are not stock, just some 15's shes running for now... she plans on getting 17";s in the spring

17" will be great on that car.

Shaking The Neighborhood

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer