the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

RSX 3.5 remote start on manual trans


Post ReplyPost New Topic
< Prev Topic Next Topic >
kai211 
Member - Posts: 12
Member spacespace
Joined: December 17, 2005
Location: United States
Posted: September 29, 2006 at 2:42 PM / IP Logged  

I'm installing a remote start on a 2005 toyota celica just wondering about how to bypass the clutch since I have everything wired up thank you

Thats SIK!!!!
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: September 29, 2006 at 2:50 PM / IP Logged  
did you use a 688M or 689M???
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
silverado42000 
Copper - Posts: 65
Copper spacespace
Joined: September 25, 2006
Location: United States
Posted: September 29, 2006 at 2:50 PM / IP Logged  
well most kits ive seen have it built in somewhat where you dont need to have the clutch pushed in, but if so then just rewire the clutch(switch the wires around) so that the clutch has to be out to start the car
RSX 3.5 remote start on manual trans -- posted image.
bryantobando 
Copper - Posts: 64
Copper spacespace
Joined: November 29, 2005
Location: United States
Posted: September 29, 2006 at 3:00 PM / IP Logged  

Is your clutch activated with positive or negative?

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: September 29, 2006 at 11:10 PM / IP Logged  

carefull boys....the mods will shut you down. Bean there, done that, Theres a 14 pin connector behind the center console. In it you will find BLACK/ white wire in pin one. This wire needs a NEG(-) "start" pulse....varooommmmm.

Just a thought....is that Matrix manual remote start ready, monitors door pins and ebrake....Hmmmmm?

cntrylvr79 
Silver - Posts: 582
Silver spacespace
Joined: July 02, 2005
Location: United States
Posted: September 30, 2006 at 7:17 AM / IP Logged  
No it's not...     varooommmmm CRUNCH!!!
Cause I'm So white and nerdy...
First Class Certi-fried installer
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: September 30, 2006 at 11:43 AM / IP Logged  

cntrylvr79 wrote:
No it's not...     varooommmmm CRUNCH!!!

I love it....thats the best way to desribe it.....RSX 3.5 remote start on manual trans -- posted image.

kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: September 30, 2006 at 11:46 AM / IP Logged  
hence my question.... did you use the proper 688M or 689M manual transmission interface???
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: October 03, 2006 at 12:38 PM / IP Logged  

kgerry wrote:
hence my question.... did you use the proper 688M or 689M manual transmission interface???

Have you got a way of posting the install instruction for this 689M kgerry? I have never seen this piece. Thanks Bro!

kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: October 03, 2006 at 3:08 PM / IP Logged  
if i knew how to post a pdf i would... i can email it to you.....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer