remote start on prestige 997

Home / the12volt's Install Bay / Car Security and Convenience / remote start on prestige 997 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nuchy

Member - Posts: 3

Joined: January 07, 2003

Location: Barbados

Posted: October 01, 2006 at 8:42 PM / IP Logged

I installed a prestige 997 on a nissan sentra yesterday, but for some reason it does not want to remote start..........all it does when i press to remote start is flash the lights seven times....can anyone help me with this prob..............could it be the brain?...i tried another brain and it worked.......so that ruled out the wiring on the car. could it be programming?

Back to Top

doibuy

Copper - Posts: 177

Joined: March 15, 2006

Posted: October 01, 2006 at 9:57 PM / IP Logged

You need to program the tach wire. Key on press and release valet button three times - horn honks, turn off key - horn honks again, press and hold valet and start the car, parking lights will begin to flash when the tach is learned.

Other wise set the unit for voltage sense

Back to Top

nuchy

Member - Posts: 3

Joined: January 07, 2003

Location: Barbados

Posted: October 02, 2006 at 7:30 AM / IP Logged

currently have it in voltage sense...............the ignition is not even comming on, immediately after i press the button to start, the lights are flashing.............will try it in tach mode

Back to Top

actionjackson

Copper - Posts: 59

Joined: December 20, 2003

Location: United States

Posted: October 02, 2006 at 8:37 PM / IP Logged

make sure the safety shutdown toggle switch is plugged in

Jamie Jackson

*CRIMPING AINT EASY*

Back to Top

installmarc

Copper - Posts: 49

Joined: August 31, 2006

Location: United States

Posted: October 03, 2006 at 3:26 PM / IP Logged

change the setting in the r/s program options. its set to tach, switch it to voltage, it might not be labeled,i think its option 4

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: October 03, 2006 at 8:11 PM / IP Logged

They've changed the programming for the newer Audiovox stuff, and it's very confusing, especially at first.

7 flashes definitely means it's in tach mode, with tach not programmed.

You must have made a mistake with the programming, but I'm not beating you up over it; it really is confusing!

But, I would say to go back into programming again, doing it very very carefully, and make sure it's in voltage sense.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start on prestige 997

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.