the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

02 intrepid wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
sound decision 
Member - Posts: 39
Member spacespace
Joined: January 20, 2003
Location: Canada
Posted: January 20, 2003 at 12:56 PM / IP Logged  

hi everyone.

looking for a wiring diagram for a 02 intrepid. putting in a remote start and alarm with keyless.

thanks in advance

jayts95 
Copper - Posts: 150
Copper spacespace
Joined: April 24, 2002
Location: Michigan, United States
Posted: January 20, 2003 at 7:05 PM / IP Logged  

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|pink/black or red   |+  |ignition harness            |
|          STARTER|yellow              |+  |ignition harness            |
|         IGNITION|dk. blue/white      |+  |ignition harness            |
|  SECOND IGNITION|GREEN/ red           |+  |ignition harness            |
|        ACCESSORY|BLACK/ orange        |+  |ignition harness            |
| SECOND ACCESSORY|BLACK/ white         |+  |ignition harness            |
|       POWER LOCK|WHITE/ green         |*1 |back of fusebox             |
|     POWER UNLOCK|same wire           |*1 |                            |
|       LOCK MOTOR|orange              |   |BCM *2                      |
|     UNLOCK MOTOR|dk. blue            |   |BCM *2                      |
|    DISARM DEFEAT|pink/black          |   |BCM *2                      |
| PARKING LIGHTS +|do not use          |   |                            |
| PARKING LIGHTS -|yellow *3           |   |headlight switch            |
|       HEADLIGHTS|pur & pur/red or *3 |+  |fuse relay box (low only)   |
|     DOOR TRIGGER|yellow              |-  |*4                          |
|  TRUNK/HATCH PIN|tan/black           |-  |drivers kick panel          |
|TRNK/HTCH RELEASE|BLACK/ white         |+  |at release switch           |
|  FCTRY ALARM ARM|lt. GREEN/ orange    |*6 |drivers kick panel          |
|FCTRY ALRM DISARM|same wire           |   |                            |
|       TACHOMETER|*5                  |   |one of the coils            |
|       BRAKE WIRE|WHITE/ tan           |+  |at brake switch             |
|     HORN TRIGGER|BLACK/ red           |-  |steering column             |
|           WIPERS|                    |   |                            |
|  LF WINDOW UP/DN|lt. blue - white    |A  |at drivers door motor       |
|  RF WINDOW UP/DN|brn/wht - pur/wht   |A  |in drivers door or dkp      |
|  LR WINDOW UP/DN|blu/wht - RED / blu   |A  |in drivers door or dkp      |
|  RR WINDOW UP/DN|gry/blk - grn/wht   |A  |in drivers door or dkp      |

Notes:

NOTE: Chrysler vehicles that use a gray ignition key have an immobilizer system that needs to be bypassed when remote starting. Use DEI part number 555C or 555U.  *1 Locks are positive trigger through resistors. Use 2.7K (2700) ohms for lock and 620 ohms for unlock.  *2 BCM is located on the left side of dash with junction block.  *3 Use a 110 ohm resistor to ground (-) for parking lights and a 220 ohm resistor to ground (-) will do both headlights and parking lights.  *4 In a brown connector at the rear of the fuse box.  *5 This vehicle has an ignition coil for each cylinder. For tach use a tan/stripe wire at any one of the coils.  *6 Arm is positive trigger thru a 1.87K ohm resistor, this will also lock the doors. Disarm is positive trigger thru a 680 ohm resistor, if use double pulse this will also unlock the doors. Must use relays.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer