the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

chdl7 and xk532 from bypasskit problems


Post ReplyPost New Topic
< Prev Topic Next Topic >
vitrox 
Copper - Posts: 96
Copper spacespace
Joined: June 10, 2003
Posted: October 06, 2006 at 8:30 PM / IP Logged  

I know i'm not the only one using these bypasses on the new dodges, jeeps, and chryslers.  Has anyone gotten the 2nd start activation to actually work yet?  I was doing a bit of testing today on a 06 ram and I tried to get it to remote start without doing the dual relay setup.  I used only the module which is supposed to do the 2nd start and accessory activation.  Well to sum it up, it didn't work.  The truck actually started, so I know the 2nd start activation worked but i'm pretty positive that the 2nd accessory did not work.  The (brake) and (abs) lights both came on almost immediately after start and within 5-10 seconds the (airbag) light came on.

anyone got some insight on getting these things to work properly and eliminate the 2 relays? 

oh, and i eventually just cut the module wire and wired up the dual relays and it worked perfectly..

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 06, 2006 at 9:45 PM / IP Logged  
Have you tried the Knowledge Base from Trilogix to see if their techies have any insight on why it's not working ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
vitrox 
Copper - Posts: 96
Copper spacespace
Joined: June 10, 2003
Posted: October 07, 2006 at 1:09 AM / IP Logged  
i checked the knowledge base on bypasskits website but to no avail. I have however sent a message discussing this with their techs. I still have not heard back from them, but its only been 12 hours now.
snotdobbs 
Copper - Posts: 148
Copper spacespace
Joined: September 11, 2003
Location: United States
Posted: October 09, 2006 at 6:56 AM / IP Logged  
installed one on saturday..........flippin fantastic piece.....however after the install was complete i attempted to program the transponder and i got nothin so all the time i saved with the part was wasted on troubleshooting and tech support line hold time.....when i talked to the tech guys they basically read the manual to me....it was rather condescending.....anyways after all was said and donethe first part would not activate the mux circuit so it wouldnt program or do anything...luckilly i ordered many of these 532's and plugged a second one in....within seconds i was remote starting the truck and activating all the data options.....these new xpresskit parts are sweet used an xk04 and and xk05 on friday and they worked superbly......
vitrox 
Copper - Posts: 96
Copper spacespace
Joined: June 10, 2003
Posted: October 10, 2006 at 11:50 PM / IP Logged  
sometimes the vehicles will goto sleep, just wake em back up by using the factory keyfob.. we've had issues with all the new jeeps, chrysler and dodge. One didn't start after we were done putting an autostart in. All we did to fix it.. lock and unlock with factory keyfob, boom, fixed.
anyway, still no word back from tech support. Good thing i'm not holding my breath.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 11, 2006 at 9:06 AM / IP Logged  
Have you tried another module yet ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
vitrox 
Copper - Posts: 96
Copper spacespace
Joined: June 10, 2003
Posted: December 29, 2006 at 7:29 PM / IP Logged  
still haven't gotten these things to work, just tried again on an 07 dakota.. no 2nd start or accessory.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer