clifford 10.5 door lock?

i just almost finished installing the clifford 10.5 alarm into my civic, the only thing i have left is the door locks. my old clifford alarm only had a two wire harness for door locks which was very easy to install, but the clifford 10.5 has a 7-pin harness and now i need some help. im using aftermarket actuators with two wires comming from each. could someone give me some information on how to install door locks. thanks.

Easy, purple and PURPLE / black to 12volts, BROWN / black and WHITE/ black to ground, and blue/black and GREEN/ black to your two actuator wires. Hook them up and if the locks are backwards reverse the green and blue. The BLACK/ white is your interior light polarity. That goes to ground on a Civic. Be sure to hook up the other BLACK/ white H14 to the door trigger and this will give you dome light supervision....Mike M2

Tech Manager

CS Dealer Services

thanks alot!