the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

87 mustang, Viper 5900


Post ReplyPost New Topic
< Prev Topic Next Topic >
faded808 
Copper - Posts: 87
Copper spacespace
Joined: June 02, 2005
Location: United States
Posted: October 08, 2006 at 6:39 PM / IP Logged  
Hi all, I just bought the DEI 530t from circuitcity and want to install it on my mustang...
I have a 87 mustang, I have the wiring colors and all but dont know were to tap into to the switch side??
did anyone install these moduel in a 87-93 mustang??
need help........
gc714 
Member - Posts: 32
Member spacespace
Joined: February 07, 2004
Location: United States
Posted: October 08, 2006 at 7:56 PM / IP Logged  
in order for a switch to function as a 1 touch, you need to splice between the switch & the window motor. Start in the dri. door. If you don't care if the pass. side switch has the option then you can just tap the wires for that door in the kick panel.
faded808 
Copper - Posts: 87
Copper spacespace
Joined: June 02, 2005
Location: United States
Posted: October 08, 2006 at 8:14 PM / IP Logged  
ok, so if I go to the drivers door switch both the doors will have the 1-touch??
well i know were to hook up the heavy gauge wire but dont know were to hook up the smaller gauge wires... do I just use the drivers side door switches for all the connections????
faded808 
Copper - Posts: 87
Copper spacespace
Joined: June 02, 2005
Location: United States
Posted: October 11, 2006 at 2:10 AM / IP Logged  
I just installed the viper 5900 alarm on my car, everything works but havent connected all the wires...
the ones i havnt connected are the door lock harness(GREEN/ blue wires)and the remote start harness....
I need help hooking things up especialy the remote start, i have a manuel by the way....
for the door lock harness do i just connect them to the lock/unclock wires....
need help ASAP.....
thanks
faded808 
Copper - Posts: 87
Copper spacespace
Joined: June 02, 2005
Location: United States
Posted: October 11, 2006 at 6:27 AM / IP Logged  
ok, well i got things all hooked up now...
my problem is the remote start, it beeps but nothing happens, light flashes, on the remote it says that its starting but nothing??
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: October 11, 2006 at 7:08 AM / IP Logged  
Does anything in the dash energize when you try to remote start?
Does the starter 'crank'? If not, check to make sure you wired the starter kill circuit in properly.
faded808 
Copper - Posts: 87
Copper spacespace
Joined: June 02, 2005
Location: United States
Posted: October 11, 2006 at 7:09 AM / IP Logged  
nope there is no crank at all, just a click from the relay....
faded808 
Copper - Posts: 87
Copper spacespace
Joined: June 02, 2005
Location: United States
Posted: October 11, 2006 at 7:11 AM / IP Logged  
also do i hve to bypass the cluth??
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: October 11, 2006 at 12:52 PM / IP Logged  
I am pretty sure that if you connect your starter output wire to the outside from the clutch switch the starter will engage. If you sit in the car and depress the clutch will the remote start work?
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: October 11, 2006 at 12:54 PM / IP Logged  
Scratch that...
Viper does not make a remote start for a manual transmission (atleast not in the U.S. market). You should NOT be installing a DEI remote start into a manual transmission vehicle. It does not have the proper safety precautions required for manual transmissions.
Get a Compustar.
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer