eclipse spyder inclosure

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / eclipse spyder inclosure (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jraguilar

Member - Posts: 3

Joined: October 06, 2006

Location: United States

Posted: October 13, 2006 at 1:48 PM / IP Logged

i want to make a custom box for my eclipse since its the spyder i have limited space.. 12'' inch sub amp and a copacitor but how do i get started what kind of wood should i use??

jraguilar

Back to Top

bomex_eclipse

Member - Posts: 46

Joined: October 25, 2004

Location: United States

Posted: October 22, 2006 at 10:04 AM / IP Logged

What do you plan on the sound system to look like. You need to use MDF wood for the base, framing, and where ever there is a flat surface for the best strength hope this helps you post some pics of what you want it to look like

If You Can Imagine It Glass It!

Back to Top

integratyper934

Copper - Posts: 150

Joined: April 01, 2006

Location: United States

Posted: October 22, 2006 at 8:55 PM / IP Logged

i did a false floor for a 12" alp R and flushed/beauty boarded two alp amps on the trunk wall behind the convertible.

Back to Top

Search for other posts by integratyper934

joescarstereo

Member - Posts: 8

Joined: October 29, 2006

Location: United Kingdom

Posted: October 29, 2006 at 10:28 PM / IP Logged

You could build wood box and then stretch material over the trunks lip under the rubber seal take a look at the one I did on my site I think its on the last page of the gallery. its (Joescarstereo.net )it is a burgandy spyder its quick and cheap

The Car show Kings

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

eclipse spyder inclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.