Compustar CM3000, DEI 1100F, 02 Explorer

Home / the12volt's Install Bay / Car Security and Convenience / Compustar CM3000, DEI 1100F, 02 Explorer (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

jfkaiser

Member - Posts: 19

Joined: September 18, 2002

Location: United States

Posted: October 31, 2006 at 9:03 PM / IP Logged

I found the correct Factory Disarm by going to the CSM

I will test the other Door Trgger candidates to determine the corect one of those.

Was trying to find some of those probes that puncture the wire only slightly for my multimeter, but struck out at Radio Shack and Axeman

Thx,

Jon

jfkaiser

Member - Posts: 19

Joined: September 18, 2002

Location: United States

Posted: November 13, 2006 at 11:09 AM / IP Logged

Hi Guys,

Just wanted to alert some folks that my DEI 1100F bypass wiring diagram was incorrect for the PATS Connector 3B on my 2002 Ford Explorer.

They should have identified PIN2 as ground and PIN1 as Transmission, but instead they have it reversed.

Just a warning.

Thx,

Jon

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar CM3000, DEI 1100F, 02 Explorer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.