03 Taurus RX/TX wires

Home / the12volt's Install Bay / Car Security and Convenience / 03 Taurus RX/TX wires (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 24, 2006 at 2:24 PM / IP Logged

anyone know what colors these will be.....i cant get the column shroud off, but it looks like they come to a green plug under the dash to the right of the column..... a green 4 pin plug... anyone know off hand which is TX and which is RX?

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: October 24, 2006 at 2:31 PM / IP Logged

There should be a ground, and ign, then the rx tx wires... I usually hook up acording to the diagram in the bypass, but have reversed them, no harm.. the module will not program... just temp wire them, proogram the module.. if the carr remote starts then your good.. if not just revers them and then program.... then solder em up...

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 14, 2004

Location: Isle Of Man

Posted: October 24, 2006 at 2:36 PM / IP Logged

If the plug is staring you in the face, (looking at the end of the plug, with the release clip UP) the TX is the far right, and the RX is next to it.

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 25, 2006 at 9:48 AM / IP Logged

thanx, i ended up using a 556S as it was much quicker ... the instructions with the XK04 were confusing (more of a hassle than confusing) it said after hooking up the module to jumper the ignition wires and jumper GWR to learn the module....

for future reference, couldnt i just have activated the remote after the second key and have had it learn the module? just like the 556S?

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 Taurus RX/TX wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.