2006 Ford Explorer Parking Light Issue

Home / the12volt's Install Bay / Car Security and Convenience / 2006 Ford Explorer Parking Light Issue (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

ice77ski

Member - Posts: 6

Joined: October 19, 2006

Location: United States

Posted: November 02, 2006 at 8:43 AM / IP Logged

I have the Viper 550 ESP system. I have the wiring diagram for the alarm. Since it has a jumper to change the light flash output from - to +, does that mean that I can hook it up directly to the + parking light wire (and change the jumper) without having to use the relay?

Thanks

ice77ski

Member - Posts: 6

Joined: October 19, 2006

Location: United States

Posted: November 02, 2006 at 8:47 AM / IP Logged

In addition to my last post....Here is what the manual says: "this wire supplies a (-) 200 mA output" This is suitable for driving (-) light control wires...." "For parking light circuits that draw 10 amps of more, the internal jumper must be switched to a (-) light flash output or a standard automotive SPDT relay must be used on the H1/2 light flash output harness wire."

Any suggestions?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 Ford Explorer Parking Light Issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.