the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 Honda Pilot, Remote Start


Post ReplyPost New Topic
< Prev Topic Next Topic >
lsondubz 
Copper - Posts: 193
Copper spacespace
Joined: September 20, 2005
Posted: November 09, 2006 at 9:46 AM / IP Logged  
Sorry that was all screwed up, I didnt proofread heres how it should read:
Use the pulse before start wire BLACK/ blue from 4-pin aux plug, run that to Factory Alarm Disarm BLACK/ red   -   pass. fuse box, lt. grn 20 pin plug ,this will disarm the alarm and unlock the doors,
Then you need to run the pulse after start wire BLACK/ green wire from the 4-pin aux plug to the Factory Alarm Arm blue/white to blue/green   -   pass. fuse box, lt. grn 20 pin plug, this will rearm the alarm and lock the doors
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer