ext cab owners 4 10's or 2 12's

these prefabbed boxes out there for 99-up gm extended cabs (downfire)have either 2 12's or 4 10's with the proper airspace calculated for both wich would you go with.. have a phoenix gold rsd1200.1 1000rms @2ohm 2 500rms 12's or 4 250rms 10's what you do???????? using pioneer w306dvc 12's now in box mentioned above.sounds good but wondering if 4 10's would be better...                shane

Fosgate P210S4 require .5 air space the box mentioned is 1.2 per side at 200rms per sub

bump

That should be fine..an extra .1 cu ft won't make a difference...should it pretty hard. Though I highly hate the RF Punch subs...cones are weak, tinsel leads have weak connections, for the quality they are overpriced

any reccomendations on sub to use

If you were to go with 4 10's I would get the Infinity perfect dual voice coil subs. They sound clean and you can get them down to 2 ohms with your monoblock setup.MECP Certified

Fry's Electronics MEI - Anaheim, Ca

"Kneel Before Zod"

that'll go great with my infinity kappa seperates and 4 x 6 plates

145 a piece before shipping???got anything a little more reasonable??

Yes you could go reference series, just make sure they're dual voice coil.MECP Certified

Fry's Electronics MEI - Anaheim, Ca

"Kneel Before Zod"