the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Gentex Mirror Wiring Diagram


Post ReplyPost New Topic
< Prev Topic Next Topic >
2bit 
Member - Posts: 3
Member spacespace
Joined: August 03, 2004
Location: United States
Posted: August 03, 2004 at 2:50 AM / IP Logged  
Hi, I am new here. I just got a Gentex auto dim mirror with compass off ebay. On eht back of the mirror, it says GNTX140. It does not have buttons on the mirror, but has a switch on the bottom that says off, mirror, and c/m. There are only 2 wires in use on this mirror, pink (positive) and black (ground). My question is, I hooked the mirror up temporarily, and it works fine except the compass will only say N or NW no matter what way it is turned.  One of the earlier posts said to hold the compss button until c appears and then go slow in a circle. Well, I dont have a button, I have a switch, so how does this work to get it calibrated????
2bit 
Member - Posts: 3
Member spacespace
Joined: August 03, 2004
Location: United States
Posted: August 10, 2004 at 2:31 AM / IP Logged  
I contacted Gentex directly, and got it fixed.
rboc 
Member - Posts: 3
Member spacespace
Joined: July 15, 2004
Location: United States
Posted: August 10, 2004 at 8:55 AM / IP Logged  
"I contacted Gentx directly, and got it fixed" doesn't help everyopne else on this forum.  Please post your solution so that everyone can benefit from your call.
Page of 8

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, October 18, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer