06 Dodge deisel issue

I have not come across this problem but I found out some info, perhaps it will help. I can't say for sure but it is odd so figure I'd post it regardless.

12volts  lt. blue/red (2A)   +   ignition harness 

Starter  dk. GREEN/ YELLOW   +   ign harn or starter button (SRT-10)  Second Starter  PURPLE / brown   -   ignition harness  Notes: The second starter wire is negative trigger thru an 180 ohm resistor. MUST use a relay. Ignition  pink/white   +   ignition harness  Second Ignition  N/A        Third Ignition  N/A        Accessory  same as second starter wire   -   ignition harness  Notes: The accessory wire is negative trigger thru a 610 ohm resistor. MUST use a relay.

Finnally got things solved with the above truck.. The shift indicator and cruise control issues were due to the 1k ohm resistor bypass kits tells to to put between the pink and ground. Removed that, and allthings functioned perfectly.. Tech support tried haveing me install a 7.5 k in series with the starter output of the RS , that didn't work and also treid haveing me relay a 1kohm to ground to the same pink input to the bypass - still no luck.. eventually I just removed it & hard wired everything back together [no resistors] and everthing worked... anyone see any issues with doing this? chdl7 - pk2 was the bypass used on an Astro 2205aTire Proz Stillwater Mn

High End Restyling and Comlete Repair