the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Please help on my Accent 2001 L


Post ReplyPost New Topic
< Prev Topic Next Topic >
herson21 
Member - Posts: 10
Member spacespace
Joined: January 26, 2003
Location: United States
Posted: January 28, 2003 at 8:54 PM / IP Logged  

Hey Jeff, this is what happend now, I put together the pink and the blue wire, so now I can go in Valet mode, so I programed everything , and works good ,    now I intall the relay for bypass the chutch this is what i did?

87  with the wire is only ground when the chutch is depress

30  with the wire is ground all times in the chutch

86 12 V

85 ground to the chassis

87 A   None

So now the remote start dosen't work , when I press the E botton the parking ligths flash and the siren bepps 2 times but that it, and also the car now doesn't need to depress the chutch for start and when I shutt it down,  the car continue running; I have to turn the key off then on and then back off again so that way the engine stop .

everything else works ok , also one more question , what is the prosses to turn off the car in order to remote start next time??

thanks:  Herson.....

Pura Vida
Player69 
Silver - Posts: 504
Silver spacespace
Joined: October 27, 2002
Posted: January 28, 2003 at 9:00 PM / IP Logged  

your 85 wire should go to a ground out while remote start is running.  By grounding the 85 wire you are energising the relay therefore it acts like you have pressed the clutch in.  You need to switch that so it only is grounded when it is starting with the remote start.

The procedure is usually something like this.

While engine is running, pull park brake, put in neutral, press remote start button then turn key off.  It should remain running then open and close the door and shut remote start off.  It then should start the next time you push the button unless a door was opened in between.

herson21 
Member - Posts: 10
Member spacespace
Joined: January 26, 2003
Location: United States
Posted: January 28, 2003 at 9:47 PM / IP Logged  

hey what do you mean ground out while remote start is running , which wire I have to conect or what i have to do , sorry that I don't know that much about alarms but I try to learn whith you guys every day so if you can explain me a little more .

Herson///

Pura Vida
Player69 
Silver - Posts: 504
Silver spacespace
Joined: October 27, 2002
Posted: January 28, 2003 at 9:52 PM / IP Logged  
There will be a wire that has a negative pulse output only while the car is running on remote start.  It can be reffered to as many different things so I can't help you much more then that.  You can also use one that is ground out while the remote start is cranking if it has such a thing.  It might be reffered to as second starter output -
herson21 
Member - Posts: 10
Member spacespace
Joined: January 26, 2003
Location: United States
Posted: January 28, 2003 at 11:05 PM / IP Logged  

Hey Guess what my car works  yeahhhhh, like I said  thanks jeff so much I just turn off the car like you told me , and works so now everything is working , just the relay  but its no big deal now I don't have to depress the chutch to start the car , so thanks one more time and hopefuly my next project  is key less entry , probably is going to be easy whith this car .

Herson...

Pura Vida
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, July 29, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer