reverse 95 Mazda Millenia

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / reverse 95 Mazda Millenia (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

texmiguel

Member - Posts: 4

Joined: November 25, 2006

Location: United States

Posted: November 28, 2006 at 11:32 AM / IP Logged

Is there an elegant way to tap reverse, other than at the tail light?

Might AllData have the info? where does one look it up?

The HU needs the signal for a rear view camera.

Mike in Texas

Back to Top

jasondavis05

Copper - Posts: 55

Joined: November 14, 2006

Location: United States

Posted: November 29, 2006 at 8:26 PM / IP Logged

I haven't done this but..... there should be a wire that sends the info to the ECU that the car is in reverse, you could use that to a relay or find the factory reverse light relay and tap into that.

Good Luck.

Back to Top

texmiguel

Member - Posts: 4

Joined: November 25, 2006

Location: United States

Posted: December 02, 2006 at 11:30 AM / IP Logged

Thanks alot:) The ECU is just below the radio, I will have to look into it.

Mike in Texas

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

reverse 95 Mazda Millenia

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.