1995 Mazda 626, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 1995 Mazda 626, remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

ainsane

Member - Posts: 8

Joined: November 25, 2006

Location: Canada

Posted: December 02, 2006 at 8:00 PM / IP Logged

I got it working. For future reference, here's how:

85/86 - ground/5th relay output

30/87 - black-yellow/black-blue from the clutch switch

I'm not sure how Velocity Motors meant to use the starter wire, but I tried using the starter wire instead of 5th relay output (for some reason I forgot there was a 5th), and without a diode it activated the switch every time I turned the key.

Anyway, working good now.

Thanks for all the help.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1995 Mazda 626, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.