06 Tundra DC Headlight?

I tapped into the headlight wire, the yellow and green at the switch. When I ground the relay I installed, it turns the headlights on when the switch is off, with the switch on, the lights do come on. I know my relay works. I think it has to do with the auto headlight feature. I need to tap into the wire after the auto off relay or BCM, wherever the feature is managed. Any ideas? thanks I tapped into the reverse light relay, diode isolated it, added a relay. Whenever I arm or disarm the system, they come on for 30 seconds. I am trying to do the same for the headlights, but ran into this little bump??!!!

I posted a week or so about the headlight wire. DEI called for a different wire that didnt work when the switch was off. Now, I have illuminated entry with the headlights and reverse lights. The headlight wire is a negative trigger. It is a light GREEN/ red. I found it right before it goes through the firewall from the bcm to the relay next to the battery. just some FYIToDDR

good job. thanks for the infoHouston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).