the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 Chevy Suburban Viper 791xv & 457GW


Post ReplyPost New Topic
< Prev Topic Next Topic >
Serrano 
Member - Posts: 2
Member spacespace
Joined: June 23, 2005
Location: United States
Posted: December 11, 2006 at 7:39 PM / IP Logged  
HAve everything hook up engine wont start with key, Im pretty sure of the accuracy of my install need some input please
au5599 
Copper - Posts: 94
Copper spacespace
Joined: December 22, 2005
Location: United States
Posted: December 11, 2006 at 7:48 PM / IP Logged  

03 chevy suburban just did mine a week ago-  what is it doing? if it just starts runs for 2-3 seconds and dies you do not have the security bypassed. where do you have your tach ran to? you can grab white wire going to the cluster, odd color of an injector if in engine compartment.

do you have both igntion lines powering up?

need more info of what you did and what it is doing

Street Dreams Car Club
93 GRAND CARAVAN SE / Astro
Team New York SS3-4 06 & SM3-4 07 DB Drag World Finals
2003 Chevy Suburban LT / 98 GTP
Serrano 
Member - Posts: 2
Member spacespace
Joined: June 23, 2005
Location: United States
Posted: December 11, 2006 at 9:39 PM / IP Logged  

I Have Both ignitons. Im Having trouble programming the 457gw to bypass the passlock 2

Black - Connected to the black wire coming from switch

Red - to 12v

Gray/Black- to gray/black bcm black plug pin E

RED / White - not used

BROWN / white- not used

Light green - green lock (-)

Blue - Blue - unlock

Violet- to violet diognostic plug

Blue/white - not sure where to connect

green - not using

05gt 
Silver - Posts: 628
Silver spacespace
Joined: October 30, 2005
Location: British Columbia, Canada
Posted: December 11, 2006 at 10:26 PM / IP Logged  
the blue/white will go to the status wire coming from your remote starter, it may also be called ground out when running
suburban boy 
Copper - Posts: 54
Copper spacespace
Joined: November 14, 2006
Posted: December 12, 2006 at 3:51 AM / IP Logged  
the blue and white will go to the status wire and its the same color i believe, chevk the diagram it has it printed..
Suburban boy
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: December 12, 2006 at 7:00 AM / IP Logged  
You have the black wire where???? put it to a strong chassis ground...
Mike M2
Tech Manager
CS Dealer Services

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer