diy rattler 369d on 2000 tacoma

Home / the12volt's Install Bay / Car Security and Convenience / diy rattler 369d on 2000 tacoma (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hla.2

Member - Posts: 3

Joined: December 11, 2006

Location: United States

Posted: December 11, 2006 at 7:51 PM / IP Logged

I have attempted to install this remote start on my tacoma. I cannot get it to do anything. I have checked all the wires 3 times. I am having trouble w/ door locks. But even though, the module makes no noise whatsoever. I have checked the volts on all ignition wires; they are good. Checked my ground; good. Installed hood safety, nuetral ground, and brake switch. The only other wires connected are parking lights and tac. At one time while doing the locks it did start clicking w/o pressing button but then quit. Could someone help please.

ha

Back to Top

hla.2

Member - Posts: 3

Joined: December 11, 2006

Location: United States

Posted: December 16, 2006 at 3:42 PM / IP Logged

I have a 2000 toyota tacoma. I have attempted to install a diyrattler 369d remote start on my tacoma. I cannot get it to do anything. I have checked all the wires 3 times. The module makes no noise whatsoever. I have checked the volts on all ignition wires; they are good. Checked my ground; good. Installed hood safety, nuetral ground, and brake switch. The only other wires connected are parking lights and tac. At one time while doing the locks the module did start clicking w/o pressing button but then quit.

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 16, 2006 at 3:53 PM / IP Logged

Are you sure the antenna is plugged in correctly?

Mike M2

Tech Manager

CS Dealer Services

Back to Top

hla.2

Member - Posts: 3

Joined: December 11, 2006

Location: United States

Posted: December 17, 2006 at 11:07 AM / IP Logged

I just checked it. It is all the way in and the right way.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

diy rattler 369d on 2000 tacoma

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.