Prostart ct-3300 door locks

Home / the12volt's Install Bay / Car Security and Convenience / Prostart ct-3300 door locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

new__guy

Member - Posts: 3

Joined: December 14, 2006

Location: Canada

Posted: December 14, 2006 at 2:09 PM / IP Logged

Hi Guys, I bought a prostart ct-3300 for a 2001 dodge caravan with out OEM keyless entry (with power locks). My question is, how do I hook up the door locks? Do I buy the ProStart Door Lock Kit from Canadian Tire? Do I install two relays or can I hook up the two wires from the prostart direct to the single wire for the door locks?

Also, what is the doorpin for and do I need to hook it up?

Thanks in advance, Mike

Back to Top

new__guy

Member - Posts: 3

Joined: December 14, 2006

Location: Canada

Posted: December 17, 2006 at 12:28 PM / IP Logged

bump

Back to Top

roadworks

Member - Posts: 31

Joined: June 29, 2006

Location: Ontario, Canada

Posted: December 17, 2006 at 9:34 PM / IP Logged

This vehicle uses a 1-Wire Door Locking System requiring a (-)Negative thru a 5200 Ohm Resistor for LOCK, and a (-)Negative thru a 2000 Ohm Resistor for UNLOCK. You will need to instal to relays for the doors to work.. The door pin does not need to be connected in your application.

http://64.85.6.129/extrainfo/diagrams/29358_CARAVAN_CHRYSLER%20MINI%20VAN%2001%20-%20UP%201%20WIRE%20JBS%20UNITS.pdf

refer to this link for the wiring of the 2 relays.. in the pdf file you will notice three different examples.. use only the first one..

Back to Top

new__guy

Member - Posts: 3

Joined: December 14, 2006

Location: Canada

Posted: December 19, 2006 at 8:23 AM / IP Logged

Thanks for the info. I live north of Toronto. Do you know where I can buy the relays and resistors? What values does the relays have to be?

Mike

Back to Top

roadworks

Member - Posts: 31

Joined: June 29, 2006

Location: Ontario, Canada

Posted: December 19, 2006 at 5:10 PM / IP Logged

you can pick up the relays at any Canadian Tire. Their part number is 34-0687-6. It is a DLXK-100 rleay kit.. there should be 2 relays and 2 sockets. You will need a 2000 ohm resistor for unlock and a 5200 ohm resistor for lock. Follow the first example on the pdf I sent you and you should have no problems.

Back to Top

kohara73

Copper - Posts: 192

Joined: December 08, 2005

Location: Canada

Posted: December 20, 2006 at 7:10 PM / IP Logged

The unit being a Prostart, I wouldn't bother with the relays. Just use the resistor inline on the wire. This has always worked for me on Prostart units.

Keith

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Prostart ct-3300 door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.