06 bmw z-4 locks

Home / the12volt's Install Bay / Car Security and Convenience / 06 bmw z-4 locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

txaggiemp

Member - Posts: 8

Joined: May 28, 2005

Posted: December 19, 2006 at 4:22 PM / IP Logged

anybody install keyless on a 06 z-4? we have the remote start working but no-go on the locks. i have the directech sheet but that hasen't helped at all. i'm looking for first hand knowledge here, i've been through it with directed and they are no help.

the customer is not always right

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 20, 2006 at 12:27 AM / IP Logged

LOCK

Blue/red

At General module behind glovebox

In center plug

UNLOCK

White

At General module behind glovebox

In center plug

How could this be difficult? Is the module NOT there? Can you not find the wires this color? Do they NOT test properly?

jihadmatar

Member - Posts: 8

Joined: October 31, 2006

Posted: February 17, 2007 at 2:00 PM / IP Logged

hello, this is jay and i install alarms and starters(basic mecp).

u seem that you know your stuff. i am working on a 1999 a4 2.8 quattro.

have a problem w door locks parts. i am installing the xs- 900s systems. according to its wiring diagarm i need to cut the main wire that is going form the vacuum pump in the trunk to the door switch. this wire should show 12v with door unlocked and 0 when locked. do you know what color or location? or am i wrong all together. any help is greatly appreciated.

email address is jihadmatar@yahoo.com

thanks.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 20, 2007 at 4:57 PM / IP Logged

NO NO NO Check plugs in driver or passenger footwell look for plug on looms coming out of dor into plug, its low current neg for lock and unlock and hold the lockwiire for window close. THAT SIMPLE!

jihadmatar

Member - Posts: 8

Joined: October 31, 2006

Posted: February 20, 2007 at 5:09 PM / IP Logged

howie ii,

thanks for the help. what did you mean at the end though by: hold the lock wire for window close. what does this means.

thanks again,

jay.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 21, 2007 at 3:47 AM / IP Logged

Use a timed (about 5 secs) neg output and join to lock wire, see installation manual for that alarm.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 bmw z-4 locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.