the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Speakers amp funny whistling sound


Post ReplyPost New Topic
< Prev Topic Next Topic >
auzzie_tj 
Member - Posts: 8
Member spacespace
Joined: December 22, 2006
Location: Australia
Posted: December 23, 2006 at 6:17 AM / IP Logged  

OK i dont think this is working, sorry for the spamming doodie.. i was trying to get it linked to the site i,m hosting the image at

direct link to image

https://img301.imageshack.us/img301/766/pinksubik8.jpg

helloo:-)
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: December 23, 2006 at 4:48 PM / IP Logged  
No, assuming the cables are good, that will not make a difference other than expense. Like stated above, the problem is the deck. If you ground the outer portions of the rca's and the noise goes away, you've pinpointed the problem to the noisy Pioneer.
My ex once told me I have a perfect face for radio.
auzzie_tj 
Member - Posts: 8
Member spacespace
Joined: December 22, 2006
Location: Australia
Posted: December 24, 2006 at 4:40 AM / IP Logged  

HEYY all, today i grounded the rca cables, from near the deck only, not on amp side... and wallah, all noise gone....+ seems like there is extra power goin thru.. dunno..

so what is the problem now... did it mean that my deck is funny? should i go 4 a exchange under warranty? or will it be fine.. i,m certainly happy with the sound quality now...

helloo:-)
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: December 24, 2006 at 8:55 AM / IP Logged  
It's up to you, but I'm strongly biased against Pioneer decks for this reason. What you did was a "band-aid" approach fix, but it got rid of the noise. I mention this because grounding the cables would not be necessary if the deck had a good internal ground to begin with (exactly why I would take it back).
You paid extra for an extended warranty, why not use it?    What if you take it back, and they don't have another one in stock (on backorder), will they tell you they have to send yours in for repair? What if you go with another brand, but then decide you don't like the controls, etc.- can you then return that one as well? What are the stipulations to your warranty? There are a lot of "what-if's" that need to be weighed first. You can discuss your different options with your salesperson. If you're happy with the functions and all, you can leave it alone. Ultimately, it's your decision.
I'm not trying to scare you or sway you one way or another, I just want to be sure you think about it first.    
My ex once told me I have a perfect face for radio.
i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: December 24, 2006 at 7:20 PM / IP Logged  

   Your deck has a blown fuse on the bottom of the circuit board.   You can fix this problem by soldering a wire to the shield of your RCA cable and grounding the other end of the wire.     Below is a link to a picture that can help you with this.       

    http://www.bcot1.com/images/rca/asdf.html

auzzie_tj 
Member - Posts: 8
Member spacespace
Joined: December 22, 2006
Location: Australia
Posted: December 25, 2006 at 4:33 AM / IP Logged  

yeahh i dont have a soldering iron... for those who dont... jam the wires in between the gaps, u can see the gaps in the picute above, and ull know what i mean. same effect..

geepherder... as for the warranty thing... i think its fine now... its not a real biggy... if it does it again, ill take it back... lol or ill wait for the screen to get the hell stracthed... then ill take it back and get a new one.. they have them in stock..:) DEH 3850-MP or something, cool deck. i ust to tave a dvd player that i brought from ebay... for like 100 buks, worked awesome.. took a little long to load up a cd...dvd, or mp3, only thing was that the clip that holds the detacheble face on was cheapo.. and broke.. i glued it back.. after a while.. need to take my car in to the panel beaters.. one of the young fellas wanted to hear my system... so he pulled down the face.. and in the process broke the clip.. they think they broke it.. so they gave me some good cash.:Speakers amp funny whistling sound - Page 2 -- posted image. went out and brought a brand name cd player with money to spare! wohooo lol,

btw thanks guys for helpin out.. t.c merry xmas 2 all

helloo:-)
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer