the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Fibreglass Problems


Post ReplyPost New Topic
< Prev Topic Next Topic >
jacob787 
Member - Posts: 8
Member spacespace
Joined: December 07, 2006
Location: Australia
Posted: December 22, 2006 at 10:35 PM / IP Logged  
Hey i am making a custom console. And after i hav put the resin and filler on and the polyester filler on and sanded it some bits of it has sanded down bak to the original wood wat should i do to cover this up and get it bak to the stage where i can paint it?
jacob787 
Member - Posts: 8
Member spacespace
Joined: December 07, 2006
Location: Australia
Posted: December 23, 2006 at 4:21 AM / IP Logged  
can someone help me?
StealthEs 
Copper - Posts: 326
Copper spacespace
Joined: September 04, 2003
Location: New Jersey, United States
Posted: December 23, 2006 at 9:23 PM / IP Logged  
I think you are sanding too much if you back at the wood. To paint it just primer it up.
Cris
djdowdell 
Copper - Posts: 60
Copper spacespace
Joined: December 07, 2005
Location: Kentucky, United States
Posted: December 24, 2006 at 6:40 PM / IP Logged  

Even if some bits of wood are showing it will be fine unless you got deep into the wood. As long as everything is smooth and uniform it wont matter especially if it's only a lil bit here and there. But ditto to the primer before painting.

Pure Noize

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, September 28, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer