2006 Toyota Corolla, Ultrastart 1270tl

Home / the12volt's Install Bay / Car Security and Convenience / 2006 Toyota Corolla, Ultrastart 1270tl (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ZipPhReaK

Copper - Posts: 57

Joined: March 18, 2002

Posted: December 26, 2006 at 9:22 AM / IP Logged

I'm looking for any helpful tips from the more experienced installers who have done these newer 06 Corollas. Any tips or time-savers would be helpful and most appreciated!

I believe the 06 does have a factory alarm. I've heard some say you need to pulse the keysense wire to disarm the alarm when RS, and others say just to dbl pulse the unlock wire. The latter is correct right ?

I'm installing a basic remote start/keyless unit (Ultrastart 1270tl), with a XK05 transponder bypass module. How involved is getting to the ECM behind the glove-box for the bypass wires. Any tips on that ?

Thanks In Advance

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 26, 2006 at 12:26 PM / IP Logged

There is no alarm in any 06 Corolla, so don't bother with keysense. The security light on the dash is just for the immobilizer.

The Directtech info for this car is wrong for door locks. If you use the green for unlock like they suggest it will engage the safety locks. Use blue/white for lock and blue / YELLOW for unlock in the drivers kickpanel. Unlock requires 2 pulses. If the car has factory keyless, the first pulse will unlock the drivers door only. If it doesn't have keyless, the first pulse will do nothing. On either the second pulse will unlock all.

There are bizillion places to get tach, do a search here. Last week there was an entire thread on this car and the tach wire....

Mike M2

Tech Manager

CS Dealer Services

ZipPhReaK

Copper - Posts: 57

Joined: March 18, 2002

Posted: December 26, 2006 at 2:38 PM / IP Logged

Thanks for the tips. How difficult is it to get to the ECM behind the glove-box, do I have to rip apart a million things to get to it?

The bypass I had selected was the XK-05, and needs to be interfaced to the ECM. It also notes you need to hook it up to the security light as well. Any easy source of hitting that wire, short of going straight to the light ?

I went searching for that thread you mentioned and still can't find it. Maybe Im just bad at searching, i search 05, 06, toyota corolla.

Thanks

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: December 26, 2006 at 5:45 PM / IP Logged

the thread is from 24th of dec..

ZipPhReaK

Copper - Posts: 57

Joined: March 18, 2002

Posted: December 26, 2006 at 7:50 PM / IP Logged

Yah I found it . Thanks.

Soooo is accessing the ECM ridiculous or feasible for a RS install?

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 26, 2006 at 9:05 PM / IP Logged

Getting to the ECM is real easy, just pull down the glove box and it's right there.

Mike M2

Tech Manager

CS Dealer Services

ZipPhReaK

Copper - Posts: 57

Joined: March 18, 2002

Posted: December 26, 2006 at 9:26 PM / IP Logged

Excellent, Thanks Mike :)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 Toyota Corolla, Ultrastart 1270tl

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.