2007 Dodge Ram 1500 Quad Cab starter wire

I'm installing a python 991xp in this truck and have everything working except for the starter kill and remote start due to the fact that I can't find the primary starter wire (supposed to be GREEN/ YELLOW from 06 model)!!! I've tested every wire in the ignition harness with no luck. I found the 2nd starter (PURPLE / brown) but don't know if I use the one on the sentry ring harness or the harness under the turn signal. Any help is appreciated. Thanks in advance.

There isn't one! Its all muxed into the 2nd start and accy wire.. what bypass are you useing?Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

Just used a 556uw. can't figure out how to get the starter kill and accessory to work. I wired it up using the dei 1084 diagram with the -accessory/starter wire. can I use this and the starter kill? Thanks for the quick response.

Sorry but Im not framiliar with dei's newer stuff.. I use a xk532 or chdl7pk 2 for these new dodges, I'm sure someone will chime in! with the new bypasses ya don't need to worry about starter kill and second accy stuff...Tire Proz Stillwater Mn

High End Restyling and Comlete Repair