2005 montana remote start

hello, im currently installing a remote start on my montana and cant seem to find the location of the ignition harness wiring,  igniton control module,  i have the drawing and the igniton #1 is pink, and i see about 8 pink wires in the main bundle going across the engine,

thanks in advance for any advice,

greg

good day,

i am installing a "radiostar generation" LCD remote and so far its been trouble, i cant get the starter to engage, all the door locks work, when i press for a remote start the accessory comes on but doesnt start, i tried the turbo short run and that worked,  i think my problem is with the (+) ignition input of the key cylinder to alarm, i connected this to same wire as  (+) ignition output of the heavy guage harness,?

not sure where to go from here,

thanks in advance, happy new year.

greg

On that  vehicle it has pass key 3 anti theft system that has to be bypassed. See if you can put the key in the ignition dont turn it then try to rs. If it starts thats the problem.

I am using Platform #06  Firmware:PKG5   Passkey 3

greg

feeling silly, i needed to have the park brake on for the unit to start,

and it starts, thanks for all your help, i love this website.

onto my next challenge.

greg