the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Commando KE-2DLK won't operate locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
rinscoe 
Member - Posts: 12
Member spacespace
Joined: January 03, 2007
Location: United States
Posted: January 03, 2007 at 7:08 AM / IP Logged  
Hi,
I'm installing a Command KE-2DLK kit in an 03 Cavalier. I'm having some problems with the door locks.
According to Commando support, I am to connect the + and - lock impulses off the keyless entry module to the brown and white wires off the door lock module. When I do that the door will unlock, but not lock.
All I am trying to hook up right now are the locks, so I have only connected power, ground, and the two lock trigger wires. Also I can hear relays clicking when I lock and/or unlock the doors, so I'm pretty confident the remote module is OK.
I get the feeling that I've connected the wrong wires for the lock pulse - can anyone help me with some wiring info?
Thanks in advance,
Bob
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 03, 2007 at 8:24 AM / IP Logged  
WELL....your door locks are POS(+) pulses.  They are lt.blue...and white. Lt.blue is lock, white is unlock, they are found in the drivers kick. I read the tid bit of info that is at the link you provided. This unit has POS, and NEH outputs for locks...BUT it does NOT say if the relays are built in....SO....I would find this out first, then if it does not, wire yourself up a couple of relays to throw POS(+) You can use whatever trigger from the brain you want, just wire the relay saccordingly and hook em up to the wires in the kick.
rinscoe 
Member - Posts: 12
Member spacespace
Joined: January 03, 2007
Location: United States
Posted: January 03, 2007 at 11:33 AM / IP Logged  
If I understand you correctly, you're talking about a car with factory locks. This car does not have those, so I'm using all commando parts.
I think the lock module is handling the relay work otherwise I'm not sure what good it is. If it doesn't do that then all I need are the remote module, relays, and actuators - right? I hope that makes sense.
rinscoe 
Member - Posts: 12
Member spacespace
Joined: January 03, 2007
Location: United States
Posted: January 07, 2007 at 12:14 PM / IP Logged  
BTT - anybody installed one of these before?
I've got it out and wired up on the bench, still no work with their recommended connection between the remote module and the lock module.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer