4 Channel remote control
Topic Closed)
Members
Search
Register
Login
Posted: January 21, 2007 at 6:21 PM / IP Logged
Well, I recieved the remote. The Terminals are not the same as the one on Ebay. It also only has one mode. Push a button and the corresponding relay switches as long as you push the button. Push twice or three times and the thing just switches on and off whenever button is released.
A is Normally Closed
B is Normally Open
C is common
I got it to go one direction when you push A and hold when you release it stops, push B and it goes the other direction release and it stops. I used the first diagram with the new pin outs.
Posted: January 21, 2007 at 10:56 PM / IP Logged
Posted: January 26, 2007 at 8:32 AM / IP Logged
Posted: January 27, 2007 at 5:35 PM / IP Logged
Posted: January 27, 2007 at 8:31 PM / IP Logged
Posted: January 27, 2007 at 9:04 PM / IP Logged
oh there they are now if I can figure out how those work.
Not a bad picture using my scanner.
John DeRosa (Hotwaterwizard) Stockton California When in doubt, try it out !Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
