Which kit work with Tach input only?

Home / the12volt's Install Bay / Cruise Controls / Which kit work with Tach input only? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lscman

Member - Posts: 1

Joined: January 09, 2007

Location: United States

Posted: January 09, 2007 at 8:52 AM / IP Logged

I have a 1979 4 cyl turbo Ford Mustang with manual transmission and tachometer. This is bare bones car to say the least.

I am trying to figure out which Rostra kits will function with tach input only. Actually I'm hoping the 250-1223 kit will work, so I don't have to deal with lack of vacuum & reservoirs due to the turbo.

I do not want to install magnets on the driveshaft. I understand the Audiovox kit works fine with tach signal only.

I'm not so stupid to engage the cruise in lower gears, so varying road speed in different gears for the same RPM is a non-issue.

Thanks for any replies/advice.

Back to Top

airandsound

Copper - Posts: 69

Joined: December 16, 2002

Location: United States

Posted: January 19, 2007 at 8:39 AM / IP Logged

The SCS/Frigette 3342 cruise control will do what you want.

It can use the tach signal as the VSS.

Extremely smooth and accurate cruise.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Which kit work with Tach input only?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.