spacer spacer spacer spacer

Which kit work with Tach input only?

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: January 09, 2007
Location: United States
Posted: January 09, 2007 at 8:52 AM / IP Logged  

I have a 1979 4 cyl turbo Ford Mustang with manual transmission and tachometer. This is bare bones car to say the least.

I am trying to figure out which Rostra kits will function with tach input only. Actually I'm hoping the 250-1223 kit will work, so I don't have to deal with lack of vacuum & reservoirs due to the turbo.

I do not want to install magnets on the driveshaft. I understand the Audiovox kit works fine with tach signal only.

I'm not so stupid to engage the cruise in lower gears, so varying road speed in different gears for the same RPM is a non-issue.

Thanks for any replies/advice.

Copper - Posts: 69
Copper spacespace
Joined: December 16, 2002
Location: United States
Posted: January 19, 2007 at 8:39 AM / IP Logged  
The SCS/Frigette 3342 cruise control will do what you want.
It can use the tach signal as the VSS.
Extremely smooth and accurate cruise.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Tuesday, July 16, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer