2006 Ford F-350, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2006 Ford F-350, remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

redlinecustoms

Member - Posts: 34

Joined: January 30, 2006

Location: United States

Posted: January 09, 2007 at 8:55 AM / IP Logged

Here's another problem for you guys. 1wam-s in an F350. Works fine, except for one thing. After being remote started, it will shut off if the truck's High Idle kicks in. So everytime its cold and the trucks high idle kicks in, the compustar will shut off after a few minutes. If the truck is warm and it is remote started, it will run for the full 15 minutes and there will be no problems.

Thanks

Jack

Back to Top

Search for other posts by redlinecustoms

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: January 09, 2007 at 9:17 AM / IP Logged

Where ya getting the tach? and gas I am asuming?

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

Back to Top

redlinecustoms

Member - Posts: 34

Joined: January 30, 2006

Location: United States

Posted: January 09, 2007 at 12:57 PM / IP Logged

No, diesel truck, tach is right behind the fuse box, same place directechs tells ya. It works fine if its warm outside, or if the truck is warm, but if its cold and the high idle of the truck kicks in, the remote starter will shut off after a few minutes, ive done diesel trucks before, but ive never had a problem.

Thanks

Jack

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 09, 2007 at 1:25 PM / IP Logged

Wiremagic says use an injector......No idea what color wire.

Astro says use the wire thats NOT working for ya, but the astro units you can set # of cylinders and reduce the tach setting.

I'm sorry Im not much help.......

Back to Top

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 09, 2007 at 8:15 PM / IP Logged

Try reprogramming tach while revving the engine to simulate the high-idle speed, and see how that works.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 Ford F-350, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.