clifford alarm, lock, unlock

Home / the12volt's Install Bay / Car Security and Convenience / clifford alarm, lock, unlock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

elton123

Member - Posts: 9

Joined: January 04, 2007

Posted: January 11, 2007 at 10:56 AM / IP Logged

Dont I have to wire the unlock to 12v just like the diagram and redgreen, redorange?

clifford alarm, lock, unlock - Page 2 - Last Post -- posted image.

Back to Top

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: January 11, 2007 at 12:27 PM / IP Logged

no. just the RED / green and RED / orange go +12v. the lock and unlock from the unit connect only to the lock and unlock in the vehicle. that's just showing that the switched also have a +12v input on them (so the can trigger the lock/unlock function when pressed)

Back to Top

elton123

Member - Posts: 9

Joined: January 04, 2007

Posted: January 11, 2007 at 3:01 PM / IP Logged

wired it up like u said kelly, still nothing, I can get the car to lock/unloock if I my positive cable of my voltmeter to 12v constant and probe the nagative tip to lock wire ,car would then lock and unlock when I do it to the unlock wire and alarm has to be connected. I wonder what is the problem!!

Back to Top

elton123

Member - Posts: 9

Joined: January 04, 2007

Posted: January 11, 2007 at 4:11 PM / IP Logged

well just got the lock/unlock to work, finally, issue was the battey was somewhat dead and needed a jump. thanks guys

Back to Top

elton123

Member - Posts: 9

Joined: January 04, 2007

Posted: January 22, 2007 at 2:31 PM / IP Logged

doing an install and cant get the lock/unlock to work all I hear is click* click* coming from the alarm unit everytime I press the button, doing install clifford g4 on a 325i, anyone know why the alarm unit clicks when pressing button but not locking/unlocking?

Back to Top

elton123

Member - Posts: 9

Joined: January 04, 2007

Posted: January 22, 2007 at 2:57 PM / IP Logged

^^ thought I had the unlock/lock working but now it doesnt work I all get is clicks clicks fro alarm unit.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford alarm, lock, unlock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.