2w900fmr problems

I have 2w900fmr installed on my 2006 ford focus and i recently went on vacation for a month. When i returned i found that my remote doesn't recognize my car. I have tried to make sure the car isnt in valet mode by holding buttons I&III for 1/2 sec but all i here is a beep and no information is displayed on the screen. Also currently on my lcd i see turbo and passive and the shock sensor engaged which i didnt set but happened as a result of putting new batteries in the remote. The only things that seem to register on my lcd are vibration mode and i dont even see the unlock/lock signal for my car. Any help would be greatly appreciated.

Try relearning the remote to the brain. Cycle the ignition from on to off 5 times fast then depress button 1 on the way remote and the lock button on the companion remote. Also before this take the battery out of the remote for a few mintues to reset it. the time should drop to 12:00. And what does it say when you depress button 4?

Try to keep the sub zero weather up there....thanx .

i tried the instructions above and now the car alarm will automatically set after leaving it in reservation mode, but i cant control any other functions on the remote. Even upon pressing the 4 button will only result in a beep from the car but no correspondence on the screen. I dont see an unlock/lock button on the lcd either.