2005 Chrysler Pacifica Infinity amp Bypas

I have uploaded this hoping it will help. Have a look: Chrysler Pacifica Radio Wiring with Amp and ChangerPrepare your future. It wasn't the lack of stones that killed the stone age.

Thanks man! It worked and bypass is completed. It was amazingly easy thanks to your help. Now my new HU is installed and so is my Car Computer with 7inch touchscreen. Woohoo!

Will this be the same on a 2006 Pacifica I am haveing the same problem. And where is the amp.

  The AMP is located in the back under the storage bin thing towards the right. Open the back Hatch and lift up the little storage door on the floor (where the jack is located). You will need a socket wrench to remove the screws holding down the plastic liner in the storage compartment. I think there are about 4 of them. lift out the plastic liner for the storage bin and you should find the silver amp on the right side. It is screwed down with about 3 screws. At least this is where it is located in the 2005 Pacifica. If you are still confused then reply and I will post pictures.

And, this, folks, is why this site rocks! Share the wealth brothers, share the wealth!Prepare your future. It wasn't the lack of stones that killed the stone age.

I just bought my 2005 chrysler pacifica touring edition... i dont beleive that i have the amp, or the factory sub.  I was wondering if there is a bracket, or enclosure that fits on the passenger side in the rear of the car(i think its the factory location for housing one) and if anyone knows where to get it at? and what size of sub can fit there... i really hate to fiberglass an enclosure.... also... if i need to add the aftermarket amp... where should i tap into to add my impedance adapter(line level controller)? any help is appriciated. Thanks!!!Rob