the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Reverse mount speakers


Post ReplyPost New Topic
< Prev Topic Next Topic >
shrug53 
Member - Posts: 22
Member spacespace
Joined: November 19, 2005
Posted: January 21, 2007 at 3:32 PM / IP Logged  
I have a pair of 12" subs that I would like to reverse mount (so the backs show).
My question is this: How do I wire it so that it does not look just stuck on, and how do I pass it through the box without just clamping the speaker on top of it?
Thanks.
cloak559 
Copper - Posts: 215
Copper spacespace
Joined: July 14, 2006
Location: United States
Posted: January 21, 2007 at 4:38 PM / IP Logged  
you could drill a set of holes for each voice coil and just run your wires into the box and out through a single hole or terminal cup on the other side...Just seal the wire holes with some silicone on the inside of the box...
'89 Mercedes-Benz 300E
Pioneer DEH-5900UB
(2)RE Audio SX 10"s
(1)US Amps MD3D
3ft^3 @ 37Hz
Blowing up in a car accident doesnt worry me, as long as I'm putting out some major dB's when I die...
shrug53 
Member - Posts: 22
Member spacespace
Joined: November 19, 2005
Posted: January 22, 2007 at 9:10 AM / IP Logged  
I know I have seen reverse mounted speakers, but I can not seem to find any photos. Can anyone point me towards some?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer