2001 mazda protege alarm wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2001 mazda protege alarm wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

fosgate2001

Member - Posts: 41

Joined: November 07, 2002

Location: United States

Posted: January 22, 2007 at 12:27 PM / IP Logged

im hooking up an alarm on a mazda protege and the lock and unlock wires from the alarm need to have resistors on them since its a single wire system if my alarm has neg outputs to lock and unlock do i need relays or can i just put a 4.7k or 1.5 k resistor 1 on lock wire and 1 on unlock wire will this work or will the system go crazy? thanks in advance for your help

Back to Top

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: January 26, 2007 at 9:49 PM / IP Logged

<>

MAZDA, PROTEGE, 2001, Power Lock

This is a one wire system, must use relays. Lock requires negative trigger through a 1.5K resistor, Unlock requires a negative trigger to the same wire

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 mazda protege alarm wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.