2000 dodge caravan remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2000 dodge caravan remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dwbarger

Member - Posts: 30

Joined: March 26, 2006

Location: United States

Posted: January 26, 2007 at 2:04 PM / IP Logged

Ok I am doing a 2000 caravan it is wired as a 2001 with the secind start wire and all. I did it as per the wiring diagrams of a few companies and it still just cranks. It does not have an imobilizer system on it so that is not the problem. I took the reading from the second start relay with the resistor in place and it is a negaitive with 180- ohms of resistance. I am lost on what to do here.

thanks,

Denny

splaudio

Copper - Posts: 237

Joined: January 22, 2006

Posted: January 26, 2007 at 2:25 PM / IP Logged

u have it wired all wrong ur using a 2nd start probley instead of 2nd ign. 00 and 01 are totally different. there is no - start relay.

12v red

starter yellow

ign blue

2nd ign blk/org

acc blk/white wire it like this i dont know where ur getting ur info from but it is wrong....

dwbarger

Member - Posts: 30

Joined: March 26, 2006

Location: United States

Posted: January 26, 2007 at 3:10 PM / IP Logged

splaudio wrote:

u have it wired all wrong ur using a 2nd start probley instead of 2nd ign. 00 and 01 are totally different. there is no - start relay.

12v red

starter yellow

ign blue

2nd ign blk/org

acc blk/white wire it like this i dont know where ur getting ur info from but it is wrong....

I have 3 different sources I use. The vehicle is a 2000 Manufature date of 08/00 It does not have any of these colors you mentioned in the ignition harness just the PURPLE / brown, pink/white, yellow as mentioned in the 2001 wiring diagrams. It does not have any of the 2000 wire colors in it other than the yellow

xtremej

Gold - Posts: 1,440

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 24, 2006

Location: United States

Posted: January 26, 2007 at 3:51 PM / IP Logged

08/00 is considered 2001 for wiring reference.

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: January 26, 2007 at 3:53 PM / IP Logged

Have you verified the ignition wire ie the pinl/white is getting powered properly through the crank cycle? I am assuming you have the black key also?.

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: January 26, 2007 at 3:56 PM / IP Logged

You need to send a (-)starter pulse throug a relay 180 ohms at the purp brown [key sensor]in the ign switch.. if not done the car will just crank

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

splaudio

Copper - Posts: 237

Joined: January 22, 2006

Posted: January 26, 2007 at 5:05 PM / IP Logged

oh it is a 01

12v run 8-10g fused right to the battery

starter yellow

ign pink/white

2nd starter PURPLE / brown -

how to wire the 2nd starter, use a relay

85 180ohm resistor to ground

86 12v fused

85 ground while running

30 ur 2nd ing wire PURPLE / brown...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 dodge caravan remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.