converting polarity 2nd starter vs status

Home / the12volt's Install Bay / Car Security and Convenience / converting polarity 2nd starter vs status (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ihkili18

Copper - Posts: 108

Joined: November 07, 2006

Posted: January 27, 2007 at 6:24 PM / IP Logged

Hey guys I am about to install a ultrastart into a honda accord manual. The ultrastart only has a positive 2nd starter and a - status output for the transponder bypass. To bypass my clutch would it be smarter to convert the signal of the 2nd starter to negative using a relay or should i use the status output which is neg to do both bypassing the clutch and triggering the transp bypass? thanx

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 27, 2007 at 7:29 PM / IP Logged

Whats the exact part # of the unit your installing? "ultrastart" ?

Also...what year car?

Typically the "status output" or ground while running, triggers BEFORE anything in the ignition harness portion of your remote start. That might not work for your clutch bypass......

Back to Top

ihkili18

Copper - Posts: 108

Joined: November 07, 2006

Posted: January 27, 2007 at 9:16 PM / IP Logged

2005 v6 ex coupe 6 speed (and while your at it give me the same info for a 05 rsx type s ) and im installing a ultrastart 4266m. thanx in advance

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

converting polarity 2nd starter vs status

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.