2003 explorer sport trac, viper 791 xv

good morning,

does anyone know the door ajar wire isfor 2003 ford explorer sport trac is ? installing a viper 791vx with r/s also can i diode isolate the bcm wires under dashor only under hood @the fire wall.

thanks

george

mike m2, am  i using the purple wire H 1/7 wire for the body cotrol mod or is this for the gem wake up?  blk/blue shows 12volt with key in on position.

thanks for your help

george

 i am also using directed tech tips 1093 and 1076

 i am installing a viper 791 xv in a 2003 explorer sport trac with a 556sw bypass module. my issue is the BLACK/ red input wire it says to connect to (-) remote start status input wire. nothing matches this description . the alarm works no problem,just need to get remote start to work. the BLACK/ red wireshows 12volts.

all other wires for bypass hookedas follows

black - ground

yellow - not used

red -12 v input

blk/red - ?

thanks to all for the help yesterday  thanks 

george

I never wake the GEM on Explorers and have yet to have an issue because of it. Simply connect the purple H1/7 to the BLACK/ blue in the kickpanel. It should show 12volts until the interior lights go out. Turn off the delay chirp so it doesn't give a second chirp 5 seconds after arming.

Do like f150 said, the thin blue on the small plug on the satolite relay pack will go to BLACK/ red on the 556s.