1998 integra unlock wire

 Here's the deal, I found the BLACK/ red wire in the gray connector behind cruise module in the kick panel. But when I test with my dmm, I get know reading. It should read 12v untill I push the unlock button (I tried both doors) and then the voltage goes to zero. But there is nothing, not even 12v at rest. anybody else encounter this problem? Is there another wire somewhere else to tap into? I tried all the others in that connector and no luck on the unlock. The lock I found easily, and it reads as it should. Any help appreciated. jmacf14

thanks for quick reply. I got the wiring info from my 12volt resource disc and also from this sights "vehicle wiring" section both called for BLACK/ white lock, and BLACK/ red unlock. thats what I had to go by. Thanks again for info, I will try that in the morning.jmacf14