programing remote for hornet 570t

i just bought a 570t off ebay and it didnt have a remote in th box this is a new unit is there any way that i can program a new remote if i dont have the original one

you dont need the original tx. 1. Fuses. Remove both fuses from the control module fuse holders then re-insert into main fuse holders. 12 © 2005 Directed Electronics—all rights reserved 2. Key. Turn the ignition to the ON position. The parking lights will turn On. 3. Program Mode. Press and hold the program button on the control module. The parking lights will flash Off and then back On to acknowledge program mode. 4. Programming. Press and hold button on the transmitter. The parking lights will flash Off and then back On to acknowledge transmitter programming. To add additional transmitters (within 10-seconds of the first transmitter) Press and hold button on the additional transmitter.