spacer spacer spacer spacer

Mannix SM700 Remote Starter Tach Learning - FYI

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 3
Member spacespace
Joined: November 23, 2005
Location: United States
Posted: February 10, 2007 at 3:54 PM / IP Logged  

Most installer have problem with tach learning and remote start problem. Well, here is the Free Technical for you. 1. For Automatic transmission, You have to remove the jumper from the module.

2. You have to Ground the Neutral Input wire otherwise it does not  remote start.

3. You have to set the Z to the off position on Your LCD transmiter.

4. You must have the right Tach Wire Otherwise it dose not work at all.

5. Making sure the jumper is on the Tach side if you set up for tach system.

6. If you change to generator system, you have to power off the module for 20 second and change the jumper to generator side.

Good at repair car and remote car starter

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Thursday, May 30, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer