the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

step by step triple gauge pod


Post ReplyPost New Topic
< Prev Topic Next Topic >
bbb1080 
Member - Posts: 12
Member spacespace
Joined: January 12, 2007
Location: Canada
Posted: February 11, 2007 at 5:34 PM / IP Logged  

bracing and structure- 1/4 " mdf and pvc piping.

step by step triple gauge pod - Last Post -- posted image.

wrapped in tiki lycra

step by step triple gauge pod - Last Post -- posted image.

wrapped and fiberglassed( 2 layers of matte)

step by step triple gauge pod - Last Post -- posted image.

trimmed with my kp air gauges

step by step triple gauge pod - Last Post -- posted image.

with polycrete

step by step triple gauge pod - Last Post -- posted image.

after it was misted with high build and filled accordingly

step by step triple gauge pod - Last Post -- posted image.

high build

step by step triple gauge pod - Last Post -- posted image.

done in paint

step by step triple gauge pod - Last Post -- posted image.

step by step triple gauge pod - Last Post -- posted image.

step by step triple gauge pod - Last Post -- posted image.

ricoshay 
Copper - Posts: 67
Copper spacespace
Joined: March 23, 2006
Location: United States
Posted: February 12, 2007 at 9:55 AM / IP Logged  

NICE!  WHAT BRAND AEROSOL PRIMER DID YOU USE?

bbb1080 
Member - Posts: 12
Member spacespace
Joined: January 12, 2007
Location: Canada
Posted: February 12, 2007 at 1:01 PM / IP Logged  
proform 1K highbuild. I usually spray it outta my 1.7 gun and use the catalysed 2K, but not for such a little piece. Careful if or when you buy to get the beige as the green or red sand really bad and tend to clump up the sandpaper  
maliboom 
Copper - Posts: 111
Copper spacespace
Joined: October 27, 2006
Location: Canada
Posted: February 13, 2007 at 6:14 PM / IP Logged  
Thanks for the step by step this is a project I was going to do in the summer. Good work and keep it up, by the way what kind of car is it going into. 
bbb1080 
Member - Posts: 12
Member spacespace
Joined: January 12, 2007
Location: Canada
Posted: February 13, 2007 at 7:38 PM / IP Logged  

bagged chevy half tonne with a full fiberglass interior. thanks for the feedback.

hub_n_hun 
Member - Posts: 17
Member spacespace
Joined: January 28, 2007
Location: Canada
Posted: February 13, 2007 at 8:19 PM / IP Logged  
Wow, I have never thought of using pvc piping for that. You just saved me from cutting little circles of mdf with my router which is a pain in the arse. Also, the project is looking great, keep up the good work!
bbb1080 
Member - Posts: 12
Member spacespace
Joined: January 12, 2007
Location: Canada
Posted: February 13, 2007 at 9:18 PM / IP Logged  

i use pvc pipe for everything, stuff is great!!


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, September 18, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer