kenwood ddx8017 troubleshooting

Home / the12volt's Install Bay / Car Audio / kenwood ddx8017 troubleshooting (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

justodd

Member - Posts: 26

Joined: February 26, 2005

Location: United States

Posted: February 17, 2007 at 12:32 PM / IP Logged

I put the ddx 8017 in my 03 Denali, and it worked fine for a couple of months. This morning when I turned on my truck, there was no sound coming out of the speakers. I checked my connections and my settings and all are copesetic, I also pressed the reset button, and no dice. Please help.

thanks,

todd

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: February 17, 2007 at 2:34 PM / IP Logged

Does it power up? Are you using an external amp?

Support the12volt.com

Back to Top

justodd

Member - Posts: 26

Joined: February 26, 2005

Location: United States

Posted: February 17, 2007 at 3:02 PM / IP Logged

It powers up and works fine; except no sound. No external amp. I am using the peripheral interface and the factory bose system. It worked fine until today, and then it just stopped.

thanks

Back to Top

soultinter

Copper - Posts: 170

Joined: January 16, 2004

Location: United States

Posted: February 18, 2007 at 2:24 PM / IP Logged

maybe the factory bose amp took a crap? try connecting a regular speaker directly to the ddx speaker outputs, if the is output on them, then continue down the line testing for output.

Back to Top

justodd

Member - Posts: 26

Joined: February 26, 2005

Location: United States

Posted: February 18, 2007 at 4:01 PM / IP Logged

I know that the factory bose didn't die because, I hooked up the factory radio because I didn't have time to mess around with it yesterday.

Thanks,

todd

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kenwood ddx8017 troubleshooting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.