the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

pda mount fabrication


Post ReplyPost New Topic
< Prev Topic Next Topic >
shaunblaze 
Member - Posts: 1
Member spacespace
Joined: July 01, 2006
Location: United States
Posted: February 21, 2007 at 7:22 PM / IP Logged  
I'm looking to fabricate a PDA mount/enclosure for a 99 Accord Sedan. What I would like to do is make something that would fit in the area where a 7" screen would usually go under the climate control. It needs to be something that I can easily place/remove my PDA from as I use it daily. What material and method would you all suggest. Thanks.
nubiannupe 
Copper - Posts: 55
Copper spacespace
Joined: December 09, 2002
Location: United States
Posted: February 26, 2007 at 12:47 PM / IP Logged  
What I'm thinking initially is doing something like a pod-type enclosure, using Rage Gold body filler, an MDF trim ring, and possibly vinyl to cover the thing after it's all said and done. I think Fishman did something along these lines in his Expedition, IIRC.
G. Rick (aka; Tha "R")
**Peter North is my idol***
MECP-Certified 1st Class Installer
maglin 
Copper - Posts: 206
Copper spacespace
Joined: June 30, 2004
Location: United States
Posted: February 26, 2007 at 1:19 PM / IP Logged  
you could take apart the pda, cast the rear panel w/ plaster, reverse cast that, then lay fiberglass and smooth. would fit snugly.
maglin 
Copper - Posts: 206
Copper spacespace
Joined: June 30, 2004
Location: United States
Posted: February 26, 2007 at 1:20 PM / IP Logged  
actually... i'd cast it by pressing into clay, then pour plaster into the impression. pull the clay from the plaster after it cures and you're good to go. heh.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, September 25, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer