screwed up alarm

Home / the12volt's Install Bay / Car Security and Convenience / screwed up alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gio6661

Member - Posts: 1

Joined: September 30, 2004

Location: United States

Posted: February 21, 2007 at 7:39 PM / IP Logged

ok 2 make a long story short: I ordered a ultrastarters 3500 alarm. t tapped the alarm real well. the fm pager didn't receive a signal from the alarm box so I trashed it. now my locks don't work...they make a funny noise but don't move..sometimes the car won't start when it makes this noise and if the radio is on and I push the power to adjust the seat the radio blanks out.

so what should I do???

should I go 2 an alarm shop???

what's wrong with my car??

any thoughts, opinions or suggestions will help.....thanx

**g**

Back to Top

duct tape

Copper - Posts: 125

Joined: May 18, 2006

Location: United States

Posted: February 21, 2007 at 7:50 PM / IP Logged

what kind of car is it? year/make/model?

do the door locks work with the original switches?

did you cut any ignition wires?

where did you ground the alarm?

do you have a digital multimeter? and did you use it to verify all the wires that you tapped into?

did you solder your connections?

if you dont feel comfortable troubleshooting, it might be a good idea to take it to a shop. alarm systems tie into many circuits on the car, and if you dont have alot of experience, it can be difficult to find out what is causing your problems.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

screwed up alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.