Wiring a JDL-PK?

Home / the12volt's Install Bay / General Discussion / Wiring a JDL-PK? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

flashbang

Member - Posts: 29

Joined: October 10, 2002

Location: New York, United States

Posted: February 05, 2003 at 10:59 AM / IP Logged

I am going to order a Jeep Cherokee Bypass/Interface Combo Kit (JDL-PK) for my '02 Jeep.

My question is (as basic as this seems) the wiring on the ten pin connector wires. Are the inputs to be connected to the Jeeps -door lock input, - unlock input, etc. or connect these inputs from the remote starter harness?

Thanks for any help.

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: February 05, 2003 at 11:28 AM / IP Logged

The inputs are from the remote starter. I am not familiar with this particular bypass but it most likely only has one connection to the vehicle other then power and ground. The other one will be to the data link connector.

flashbang

Member - Posts: 29

Joined: October 10, 2002

Location: New York, United States

Posted: February 05, 2003 at 12:10 PM / IP Logged

Thanks for help.

print of the JDL-PK http://www.12voltdirect.com/manual/JDL-PK_01.pdf

So, then I do not have to search for the wires in the Jeep for the dome light, power lock/unlock etc..

If I understand you correctly I would just connect my remote starter/alarm wires to the JDL-PK

Commando RS-560 car alarm/starter combo print http://www.commandocaralarms.com/manuals/RST-560install.pdf

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: February 05, 2003 at 1:06 PM / IP Logged

Right :)

For the dome light you will likely have to hook it up.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring a JDL-PK?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.