the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

carbon fiber finish


Post ReplyPost New Topic
< Prev Topic Next Topic >
maxxheadroom 
Member - Posts: 12
Member spacespace
Joined: February 24, 2007
Location: United States
Posted: February 26, 2007 at 1:20 AM / IP Logged  

I am wondering if anybody has tried laying down 1 or 2 layers of carbon fiber on the final layer of a FG box for a carbon look?

wdtsf
realitycheck 
Silver - Posts: 751
Silver spacespace
Joined: September 09, 2004
Posted: February 26, 2007 at 10:58 AM / IP Logged  
It has been done.   You'll need to let your other glass dry first. Get some epoxy resin the clear stuff to use on the carbon fiber though so it doesnt look brown. Its pretty tedious cause its hard to make the carbon fiber look right. Since carbon fiber is usually vacuum bagged. It can be done though.
Learning the trade one fiberglass creation at a time!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, October 3, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer